+27 (010) 020 2434 info@glopak.co.za



General Specifications

Capacity 2500 bph / 5L
Rinser Head 8 heads
Filler Head 8 heads AISI 316
Capper Head 4 heads AROL Capping heads
Motor Power 4 Kw
Operation voltage 3 phase 380 Watt
Pneumatics SMC Japan
PLC Omron Japan
Motor reducer BONFIGLIOLI W86U30P100B14 AGM100L4(2,2 KW 1400d/l)
Chassis 304 CrNi
Cap composition 30.000 pcs/h
Air consumption 300 lt/h
Woring gramage 3000 cc / 12000 cc non grad
Bottle change apparatus N/A
Bottle change time 5 minutes


INP Series pet bottle rinser ,filler,capper 3in1 monoblock units works with the neck- carry system, In this system there is holding arms in all around the machine and that holding arms carry the bottles from neck ,this system used by the best filling machine producers in the world.
This system gives you time saving by no need to change parts or settings between different size of bottle, this machine can fill all size of bottle in same neck dimension without changing any part or setting


Rinser unit operation:
1. Empty bottles coming from air conveyor directly to infeed star
2. Bottles pass to rinser unit from infeed star
3. Bottles turns 75 ° at first to prepare to rinse
4. Bottles turns 90° and press the nozzle to spray water
5. No bottle , no spray water system

1. Patented gripper system
2. Bottle motion by linear motion system, newest system in country and patented
3. Rinsing the bottles with special sprayer with pressured water
4. Then the bottles turn 75 ° to drill
5. Have special trays for drilled water under the bottles
6. Then bottle turns upside down and ready to pass other unit

1. Grippers has special USA spring system, same system using in 30.000 bph capacity machines and bottles never fall down.
2. Water can be taking from ozone water tank or directly the filling water tank
3. There is another drainage in the chassis all waters drain to a pipe and can be direct to anywhere the customer wants.
4. Whole rinser unit made by 304 CrNi SS , and nozzles are made by 316 CrNi SS material


1. The bottles after rinsing coming to the filling part by transpass stars carrying by neck
2. Patented nozzle system, not going inside the bottle and not touching the bottle while filling.
3. Pressure controlled filling, one of the best reliable filling control system.
4. Product tank with level control

Filling Nozzle Picture




Best ITALIAN capping head in the world (AROL)
AROL magnetic torque capping heads
No bottle no cap
Cap’s elevator unit with cap’s hopper are included in the offer


0, 01% reverse cap range / Reverse cap hitter system


1. PLC Omron Japan
2. Pneumatics SMC Japan
3. Motor Bonfiglioli
4. Pumps Ebara or Lawaro
5. Electrics Schenider France
6. Driver Omron
7. Touch Screen EasyView


Air conveyors carrying the bottle by air from neck and bringing the bottle from blowing section (or feeding by hand) directly to infeed star.

In case of manually feeding of empty bottles and based on the required capacity have to be foreseen conveyor for empty bottles up to rinser filler capper with total length 5 mt

Air conveyors made by stainless steel and there is plastic neck protector from Italy.
Each 8-10 mt conveyor has fan.

Accumulation tabletop conveyors for full bottles
For full bottles from rinser filler capper up to the labeler and from the labeler up to the end of the line.

This conveyor length will be calculate according to system and machine after filling machine. With filling machine there is 2 mt conveyor already given?

Accumulation conveyors made by stainless steel Chain Italian pallets on it Shafts (drive-idler) made from stainless steel Thermoplastic two pieces sprockets Resistance
corrosion bearings Side guides (adjustable
width) Central system with proper bowls
Supported legs (tubes) from stainless steel


There are no reviews yet.

Be the first to review “5-10 LITER WATER BOTTLING MACHINE”

Your email address will not be published. Required fields are marked *

Open chat
Glopak - Progressive packaging machines
Hi and welcome to Glopak your packaging machine solutions...

How can we help?